Bonsoir Narshorn,
Je reviens sur le post 407 https://forums.melaudia.net/showthread.p...0#pid93240 avec l'extrait ci-dessous.
New Pass “Last Watt�? Class D Amplifier?
http://www.diyaudio.com/forums/pass-labs...27446.html
D'aucuns ont bien sûr pensé à une confusion de date avec le 1er avril.
Plus sérieusement, le post 24 du fil ( http://www.diyaudio.com/forums/pass-labs...28631.html ) reprend un paragraphe du texte original de Pass sur son Zen à propos de l'asymétrie dans la pression sonore, je le recopie ci-dessous :
Simplicity is not the only reason for the use of the single-ended topology.
The characteristic of a single-ended gain stage is the most musically
natural. Its asymmetry is similar to the compression / rarefaction
characteristic of air, where for a given displacement slightly higher
pressure is observed on a positive (compression) than on a negative
(rarefaction). Air itself is observed to be a single-ended medium, where
the pressure can become very high, but never go below 0. The harmonic
distortion of such a medium is second harmonic, the least offensive variety.
C'est bizarre comme des sujets très précis peuvent abordés pratiquement au même moment sur des fora de langue différente...
Le post 27 de Petier T présente un argument très sérieux contre la pertinence de l'assymétrie de la pression sonore compensée par un ampli :
I have never understood the motive for single-ended amplification "because of the single-ended nature of sound propagation".
The asymmetric character of sound will be recorded "asymmetric" as well. The reproduction chain (amplification; loudspeaker) should not contribute in an "asymmetric" way therefore IMO, so I don't see a task there for single-ended amplification.
Qu'en pensez-vous ?
Cdt.
EDIT
Un petit ajout aux amplis à quatre transistors avec ce suiveur :
![[Image: attachment.php?aid=19315]](https://forums.melaudia.net/attachment.php?aid=19315)
Le circuit d'entrée est un différentiel série (dit aussi circuit de Rush).
La distorsiion harmonique annoncée est de 0.0008% à 10 kHz pour 2.83 V sur 8 Ohm.
source : http://www.diyaudio.com/forums/solid-sta...-amps.html
Je reviens sur le post 407 https://forums.melaudia.net/showthread.p...0#pid93240 avec l'extrait ci-dessous.
narshorn a écrit :Un dessin vaut mieux que mille paroles, on le dit souvent. Voilà l'illustration à laquelle je pensais quant à celle question du medium, typiquement non symétrique. (Variations de pressions autour d'un point toujours positif en pression)Un fil au titre "interpellant" a démarré aujourd'hui sur Diy Audio
Pass va même plus loin : je suis de son avis (ça n'engage que Lui et moi)
For reproducing music as naturally as possible, push-pull symmetric operation is not the best approach.
Air is not symmetric and does not have a push-pull characteristic.
Sound in air is a perturbation around a positive pressure point.
There is only positive pressure, more positive pressure, and less positive pressure.
A single ended Class A topology is appropriate, and we want a characteristic where the positive amplitude is very, very slightly greater than the negative. For a current gain device, that would mean gain that smoothly increases with current, and for a tube or field effect device a transconductance that smoothly increases with current. Triodes and Mosfets share a useful characteristic: their transconductance tends to increase with current. Bipolar power devices have a slight gain increase until they hit about an amp or so, and then they decline at higher currents. In general the use of bipolar in a single ended Class A circuit is a poor fit.
New Pass “Last Watt�? Class D Amplifier?
http://www.diyaudio.com/forums/pass-labs...27446.html
D'aucuns ont bien sûr pensé à une confusion de date avec le 1er avril.
Plus sérieusement, le post 24 du fil ( http://www.diyaudio.com/forums/pass-labs...28631.html ) reprend un paragraphe du texte original de Pass sur son Zen à propos de l'asymétrie dans la pression sonore, je le recopie ci-dessous :
Simplicity is not the only reason for the use of the single-ended topology.
The characteristic of a single-ended gain stage is the most musically
natural. Its asymmetry is similar to the compression / rarefaction
characteristic of air, where for a given displacement slightly higher
pressure is observed on a positive (compression) than on a negative
(rarefaction). Air itself is observed to be a single-ended medium, where
the pressure can become very high, but never go below 0. The harmonic
distortion of such a medium is second harmonic, the least offensive variety.
C'est bizarre comme des sujets très précis peuvent abordés pratiquement au même moment sur des fora de langue différente...
Le post 27 de Petier T présente un argument très sérieux contre la pertinence de l'assymétrie de la pression sonore compensée par un ampli :
I have never understood the motive for single-ended amplification "because of the single-ended nature of sound propagation".
The asymmetric character of sound will be recorded "asymmetric" as well. The reproduction chain (amplification; loudspeaker) should not contribute in an "asymmetric" way therefore IMO, so I don't see a task there for single-ended amplification.
Qu'en pensez-vous ?
Cdt.
EDIT
Un petit ajout aux amplis à quatre transistors avec ce suiveur :
Le circuit d'entrée est un différentiel série (dit aussi circuit de Rush).
La distorsiion harmonique annoncée est de 0.0008% à 10 kHz pour 2.83 V sur 8 Ohm.
source : http://www.diyaudio.com/forums/solid-sta...-amps.html

![[Image: 41888658cd9a1f38502AirismonotonicJPGeb29...813659.jpg]](https://img4.hostingpics.net/pics/41888658cd9a1f38502AirismonotonicJPGeb2999004dacd8580ed9a76dfa813659.jpg)