LargeBande a écrit :Ah c'est une info. Par contre, ce HP n'est pas proposé dans un catalogue, dommage. 25 mm () de X c'est tout de même 6 mm de plus que ce que peut faire le 18n862.
The port on the SB28 is very big, the enclosure is large enough and the BMS 18n850V2 drivers handle large signals pretty well.on the LA8 amp the excursion is kept under 12 mm even when they are pushed in clipping. Because of the PEQ added at 34 hz, the sub keeps it's response shape almost intact up until limiting occurs . I didn't take long term sweeps to see power compressions because the setup was not that well controlled but the air speed was very low on that sub. Even when I put it on the clone an I hit the 195volts VPL led, the air speeds didn't cause any noise
et seulement +-13mm pour le 18N850V2 !!!
https://www.diyaudio.com/forums/subwoofe...n-270.html