ARTA software version 1.8.1 is published - Version imprimable +- MELAUDIA :: forums (https://forums.melaudia.net) +-- Forum : espace public (https://forums.melaudia.net/forumdisplay.php?fid=10) +--- Forum : mesures (https://forums.melaudia.net/forumdisplay.php?fid=53) +--- Sujet : ARTA software version 1.8.1 is published (/showthread.php?tid=3693) |
ARTA software version 1.8.1 is published - Dominique - 22/03/2014 Bonjour, - "download" RE: ARTA software version 1.8.1 is published - pvrx - 22/03/2014 Changes from version 1.8.0 are: - In ARTA corrected registry saving of data for 1/3 octave band measurements. - In ARTA corrected determination of bitmap copy size in Directivity View. - LIMP now does check of frequency range for LSE optimization in TSP estimation. (optimization needs measurement to 20kHz or at least to 100*fs) - STEPS now has fully compatible calibration data file (*.cal) with ARTA calibration file (the difference was in opposite sign of LR channel difference dB value). - STEPS enables measurement of distortion harmonics D6+, that were unintentionally switched off in version 1.8.0 |