+- MELAUDIA :: forums (https://forums.melaudia.net)
+-- Forum : espace public (https://forums.melaudia.net/forumdisplay.php?fid=10)
+--- Forum : vinyle (https://forums.melaudia.net/forumdisplay.php?fid=45)
+--- Sujet : PLATINE EMPIRE MODELE 208 (/showthread.php?tid=536)
Pages :
1
2
RE: PLATINE EMPIRE MODELE 208 - Johannes - 28/01/2009
Hi,
may be the output frequency of this device seems not to be very stable.
Also the waveform is not a real sinus. (higher motor noise?)
I have no experience with this particular application.
Just thinking about possible problems.
Rgds, Jo
RE: PLATINE EMPIRE MODELE 208 - jerome - 29/01/2009
Johannes LeBong a écrit :may be the output frequency of this device seems not to be very stable.
Also the waveform is not a real sinus. (higher motor noise?)
En effet, la specification donne :
Output waveform (resistive load) . . . Modified sine wave
Output frequency . . . . . . . . . . . . . . . . . . . . 58HZ ,ƒÏ 62HZ
Donc ce n'est sûrement pas parfait, mais en dépannage...
Tiens nous au courant de la suite, Henri...
Jérôme
RE: PLATINE EMPIRE MODELE 208 - Henri - 29/01/2009
Bonjour,
j'ai vu la tête du signal, c'est presque un signal carré.
Mais bon, pour alimenter un moteur, je pense que c'est suffisant.
je vous tiendrai au courant comme prévu.
A bientôt.
Ne rigolez pas! je vais tenter l'anglais.
I've seen a modified sine wave, it 's very close to a quare vawe.
But I think It should work in this case because We only have a motor to
run.
I shall inform you as expected.