Poster une réponse  Créer un sujet 
Differences entre TAD 1601A , B et C ?
Auteur Message

Messages : 208
Groupe : Enregistré
Inscription : 21/03/2008
Statut : Hors ligne
Message : #1
RE: Differences entre TAD 1601A , B et C ?

"For one thing, the TL-1601c is more efficient. Before, you could almost make out the transition between the LF cone and the horn. Now, at least I cannot. The 1601c blends much better.

Most telling are plucked instruments: there is an increased immediacy with the 1601c. It is more dynamic all the way down to the lower registers. Guitars and other plucked strings (for, example, Andrew Bird's music) jump at you. You feel them on your face -- if such a thing is possible.

Why TAD stopped making them is anybody's guess. Cost? They still make other cone woofers (and of course compression drivers, but not big horns), but these were the best."

TAD TL-1601c

Rating of a mode
Form 40cm cone type Woofer
Voice coil impedance 8ohm
The minimum resonance frequency 28Hz
Play frequency band 28Hz - 2kHz
The maximum input (EIAJ) 500W
Output sound pressure level 97.5dB/W/m
Equivalent mass (infinite baffle) 117gr
Qo 0.312
The total magnetic flux 290,000maxwell
Flux density 11,500gauss
Baffle aperture 352mm
Mounting dimensions 370mm (8 hole type)
Dimensions Diameter phi400x depth of 164mm
Weight 13.0kg
Adjunct Fixing screw (M5x40) x8
Common washer x8
Nut x8
Demon nut x8
Sealing packing (1/4) x4

23/11/2018 17:16:49
Trouver tous les messages de cet utilisateur Citer ce message dans une réponse
Poster une réponse  Créer un sujet 

Messages dans ce sujet
RE: Differences entre TAD 1601A , B et C ? - fredsonqc - 23/11/2018 17:16:49

Voir une version imprimable
Envoyer ce sujet à un ami
S'abonner au sujet | Ajouter le sujet aux favoris

Aller à :