02/05/2015-14:55:20
RE: Kits Kaneda
Pour les entrées numeriques, avez-vous controlé les tensions sur les pattes VD 0 1 et G comme indiqué ci dessous:
The input header has 4 terminals: VD,1,0, and G. “VD�? is connected to the 3.3V digital supply and “G�? is ground.
Terminals “1�? and “0�? form a 2 bit register to select input 1 – 4 (4 is AES). You can use a switch or a microcontroller to set the register. The inputs can be switched at any time. The selected input will be output at both the I2S and SPDIF outputs.
Entree 1 : 1 et 0 à la masse
Entree 2 : 1 à la masse et 0 à +3,3V
Entree 3 : 1 à +3,3V et 0 à la masse
Entree 4 (AES) : 1 et 0 à +3,3 V
The input header has 4 terminals: VD,1,0, and G. “VD�? is connected to the 3.3V digital supply and “G�? is ground.
Terminals “1�? and “0�? form a 2 bit register to select input 1 – 4 (4 is AES). You can use a switch or a microcontroller to set the register. The inputs can be switched at any time. The selected input will be output at both the I2S and SPDIF outputs.
Entree 1 : 1 et 0 à la masse
Entree 2 : 1 à la masse et 0 à +3,3V
Entree 3 : 1 à +3,3V et 0 à la masse
Entree 4 (AES) : 1 et 0 à +3,3 V